3年以上
本科
2025-07-07 20:40:56
793人關注
職位描述
該職位還未進行加V認證，請仔細了解后再進行投遞！
施耐德電氣研發正式崗位（非外包），可以選擇在上海或無錫研發中心上班。
1. Maintain the drive product (220V/380V 0.1kw~500kw) for China and global market
維護變頻器產品(220V/380V 0.1kw~500kw)
2. Debug and solve technically challenging issues as part of a multidisciplinary design team
善于分析解決問題
3. Self-motivated and working with different function team
積極主動和不同的team 合作，推進問題解決
4. Making test product and implement power / analog circuit (like IGBT, Mosfet, protection circuit, switched power supply…etc)
測試驗證功率，模擬電路
5. Deeply involved into the Verification/Validation Test to verify the solution and solve product issue finally
參與測試，驗證方案
6. Communicate / discuss with foreign team independently
獨立和國外同事討論溝通
7. Follow Schneider internal maintenance process and quality strategy.
8. Maintain and increase knowledge/expertise of product engineering technologies, competitor analysis.
Skills
1. Master degree of EE with 3 years of drive products design experience is preferred. Bachelor degree will need 5 years experience.
電力電子專業碩士文憑，至少3年以上變頻產品設計經驗。學士學位需要5年以上設計經驗。
2. Good knowledge of power electronic, topology (2-level), component selection (IGBT, Mosfet) and thermal calculation (power loss simulation), protection strategy (short circuit, over voltage, thermal). 3 years experience of drive platform design is a strong nice to have.
精通電力電子知識、拓?fù)湓O(shè)計、元器件選擇(IGBT, gate driver，Bus Cap, Mosfet)、損耗計算、保護策略（短路，過壓，過溫）。3年以上變頻硬件平臺設計經驗會被優先考慮。
3. Sensors and signal conditioning (grounding schemes, filters, A/D…). Current/Voltage measurement methods.
傳感器與信號處理設計經驗，包括接地，拓?fù)洌瑸V波器，數字/模擬轉換。常用電流電壓檢測方法
4. Switched power supplies (flyback DC/DC converters, power efficiency, reliability…).
開關電源設計經驗，熟知常用拓?fù)洌骷x型，損耗與效率計算。能夠設計高頻變壓器和電感。
5. EMC principle knowledge, Differential/Common path, Conducted/Radiated Emission…
掌握EMC相關原理，差模、共模路徑分析，傳導與發射問題解決
6. High-speed digital design and circuits (microprocessors, DSPs, memories), familiar with basic controller functions (analog/Digital input or output).
熟知主控板功能設計，包括數字、模擬輸入輸出接口設計，編碼器接口設計。
7. Schematic/PCB design and tools skills(Allegro)
8. Familiar with simulation tools(matlab, plecs, pspice or psim), basic knowledge of motor control
1. Maintain the drive product (220V/380V 0.1kw~500kw) for China and global market
維護變頻器產品(220V/380V 0.1kw~500kw)
2. Debug and solve technically challenging issues as part of a multidisciplinary design team
善于分析解決問題
3. Self-motivated and working with different function team
積極主動和不同的team 合作，推進問題解決
4. Making test product and implement power / analog circuit (like IGBT, Mosfet, protection circuit, switched power supply…etc)
測試驗證功率，模擬電路
5. Deeply involved into the Verification/Validation Test to verify the solution and solve product issue finally
參與測試，驗證方案
6. Communicate / discuss with foreign team independently
獨立和國外同事討論溝通
7. Follow Schneider internal maintenance process and quality strategy.
8. Maintain and increase knowledge/expertise of product engineering technologies, competitor analysis.
Skills
1. Master degree of EE with 3 years of drive products design experience is preferred. Bachelor degree will need 5 years experience.
電力電子專業碩士文憑，至少3年以上變頻產品設計經驗。學士學位需要5年以上設計經驗。
2. Good knowledge of power electronic, topology (2-level), component selection (IGBT, Mosfet) and thermal calculation (power loss simulation), protection strategy (short circuit, over voltage, thermal). 3 years experience of drive platform design is a strong nice to have.
精通電力電子知識、拓?fù)湓O(shè)計、元器件選擇(IGBT, gate driver，Bus Cap, Mosfet)、損耗計算、保護策略（短路，過壓，過溫）。3年以上變頻硬件平臺設計經驗會被優先考慮。
3. Sensors and signal conditioning (grounding schemes, filters, A/D…). Current/Voltage measurement methods.
傳感器與信號處理設計經驗，包括接地，拓?fù)洌瑸V波器，數字/模擬轉換。常用電流電壓檢測方法
4. Switched power supplies (flyback DC/DC converters, power efficiency, reliability…).
開關電源設計經驗，熟知常用拓?fù)洌骷x型，損耗與效率計算。能夠設計高頻變壓器和電感。
5. EMC principle knowledge, Differential/Common path, Conducted/Radiated Emission…
掌握EMC相關原理，差模、共模路徑分析，傳導與發射問題解決
6. High-speed digital design and circuits (microprocessors, DSPs, memories), familiar with basic controller functions (analog/Digital input or output).
熟知主控板功能設計，包括數字、模擬輸入輸出接口設計，編碼器接口設計。
7. Schematic/PCB design and tools skills(Allegro)
8. Familiar with simulation tools(matlab, plecs, pspice or psim), basic knowledge of motor control
1. Maintain the drive product (220V/380V 0.1kw~500kw) for China and global market
維護變頻器產品(220V/380V 0.1kw~500kw)
2. Debug and solve technically challenging issues as part of a multidisciplinary design team
善于分析解決問題
3. Self-motivated and working with different function team
積極主動和不同的team 合作，推進問題解決
4. Making test product and implement power / analog circuit (like IGBT, Mosfet, protection circuit, switched power supply…etc)
測試驗證功率，模擬電路
5. Deeply involved into the Verification/Validation Test to verify the solution and solve product issue finally
參與測試，驗證方案
6. Communicate / discuss with foreign team independently
獨立和國外同事討論溝通
7. Follow Schneider internal maintenance process and quality strategy.
8. Maintain and increase knowledge/expertise of product engineering technologies, competitor analysis.
Skills
1. Master degree of EE with 3 years of drive products design experience is preferred. Bachelor degree will need 5 years experience.
電力電子專業碩士文憑，至少3年以上變頻產品設計經驗。學士學位需要5年以上設計經驗。
2. Good knowledge of power electronic, topology (2-level), component selection (IGBT, Mosfet) and thermal calculation (power loss simulation), protection strategy (short circuit, over voltage, thermal). 3 years experience of drive platform design is a strong nice to have.
精通電力電子知識、拓?fù)湓O(shè)計、元器件選擇(IGBT, gate driver，Bus Cap, Mosfet)、損耗計算、保護策略（短路，過壓，過溫）。3年以上變頻硬件平臺設計經驗會被優先考慮。
3. Sensors and signal conditioning (grounding schemes, filters, A/D…). Current/Voltage measurement methods.
傳感器與信號處理設計經驗，包括接地，拓?fù)洌瑸V波器，數字/模擬轉換。常用電流電壓檢測方法
4. Switched power supplies (flyback DC/DC converters, power efficiency, reliability…).
開關電源設計經驗，熟知常用拓?fù)洌骷x型，損耗與效率計算。能夠設計高頻變壓器和電感。
5. EMC principle knowledge, Differential/Common path, Conducted/Radiated Emission…
掌握EMC相關原理，差模、共模路徑分析，傳導與發射問題解決
6. High-speed digital design and circuits (microprocessors, DSPs, memories), familiar with basic controller functions (analog/Digital input or output).
熟知主控板功能設計，包括數字、模擬輸入輸出接口設計，編碼器接口設計。
7. Schematic/PCB design and tools skills(Allegro)
8. Familiar with simulation tools(matlab, plecs, pspice or psim), basic knowledge of motor control
1. Maintain the drive product (220V/380V 0.1kw~500kw) for China and global market
維護變頻器產品(220V/380V 0.1kw~500kw)
2. Debug and solve technically challenging issues as part of a multidisciplinary design team
善于分析解決問題
3. Self-motivated and working with different function team
積極主動和不同的team 合作，推進問題解決
4. Making test product and implement power / analog circuit (like IGBT, Mosfet, protection circuit, switched power supply…etc)
測試驗證功率，模擬電路
5. Deeply involved into the Verification/Validation Test to verify the solution and solve product issue finally
參與測試，驗證方案
6. Communicate / discuss with foreign team independently
獨立和國外同事討論溝通
7. Follow Schneider internal maintenance process and quality strategy.
8. Maintain and increase knowledge/expertise of product engineering technologies, competitor analysis.
Skills
1. Master degree of EE with 3 years of drive products design experience is preferred. Bachelor degree will need 5 years experience.
電力電子專業碩士文憑，至少3年以上變頻產品設計經驗。學士學位需要5年以上設計經驗。
2. Good knowledge of power electronic, topology (2-level), component selection (IGBT, Mosfet) and thermal calculation (power loss simulation), protection strategy (short circuit, over voltage, thermal). 3 years experience of drive platform design is a strong nice to have.
精通電力電子知識、拓?fù)湓O(shè)計、元器件選擇(IGBT, gate driver，Bus Cap, Mosfet)、損耗計算、保護策略（短路，過壓，過溫）。3年以上變頻硬件平臺設計經驗會被優先考慮。
3. Sensors and signal conditioning (grounding schemes, filters, A/D…). Current/Voltage measurement methods.
傳感器與信號處理設計經驗，包括接地，拓?fù)洌瑸V波器，數字/模擬轉換。常用電流電壓檢測方法
4. Switched power supplies (flyback DC/DC converters, power efficiency, reliability…).
開關電源設計經驗，熟知常用拓?fù)洌骷x型，損耗與效率計算。能夠設計高頻變壓器和電感。
5. EMC principle knowledge, Differential/Common path, Conducted/Radiated Emission…
掌握EMC相關原理，差模、共模路徑分析，傳導與發射問題解決
6. High-speed digital design and circuits (microprocessors, DSPs, memories), familiar with basic controller functions (analog/Digital input or output).
熟知主控板功能設計，包括數字、模擬輸入輸出接口設計，編碼器接口設計。
7. Schematic/PCB design and tools skills(Allegro)
8. Familiar with simulation tools(matlab, plecs, pspice or psim), basic knowledge of motor control
注：聯系我時，請說是在蘿崗人才網上看到的。
工作地點
地址：綏化綏棱縣張江集電港會展中心-9號樓
求職提示：用人單位發布虛假招聘信息，或以任何名義向求職者收取財物（如體檢費、置裝費、押金、服裝費、培訓費、身份證、畢業證等），均涉嫌違法，請求職者務必提高警惕。
職位發布者
Vick..HR
施耐德電氣(中國)有限公司
-
電子技術·半導體·集成電路
-
1000人以上
-
股份制企業
-
北京市朝陽區望京東路6號施耐德電氣大廈
